The ATEL 25 Point Furnace Tune Up

Unlike our competitors, our tune ups usually take over 1 hour and 15 minutes: the hour is spent working on the furnace, and reviewing the report with the homeowner takes the rest of the time.

items we check:

• Check thermostat and batteries – Qty/Battery type
• Check and adjust all safety controls
• Check burners
• Inspect heat exchanger
• Check and inspect flame sensor
• Clean and adjust pilot assembly
• Clean and check spark and ignition control
• Adjust burner, analyze for efficiency including temperature rise – Degrees F
• Check line pressure in w.c.
• Low fire – ” w.c.
• High fire – ” w.c.
• Lubricate all moving parts
• Check for gas/oil/water leaks in furnace, rust stains
• Check filter type and size
• Verify 2nd stage operation
• TESP
• Turn exposed dampers to heating if marked
• Venting – check flue for obstruction
• Venting – check termination
• Venting – check for proper slope and support
• Check drains if necessary by testing with water
• Check blower/ circulator static pressure – ” w.c.
• Check for loose wires and all connections
• Gas test tag, gas piping completed and bonded
• Return gas to unit and re-light all other appliances
• Is appliance approved? (i.e. C.G.A., UL, etc.)
• Readings – Return air temperature – Degrees F
• Readings – Supply air temperature – Degrees F
• With every furnace tune up and cleaning, we provide you with a written report that we review with you.

Customer Review

I want to share with you and your team that I am very happy with you and Larry’s work yesterday.

My wife cooked up a storm … and barely a smell lingered on for more than 45 minutes. This is what we had in our house in Manotick- and now, you have done the same in this house.

I was also impressed with Larry- Great work, Respectful, took the time to explain what he would do, cleaned up after the job.”

Thanks again for the great service.